CAPITA THE BLACK SNOWBOARD OF DEATH 2022 - 162

CAPITA THE BLACK SNOWBOARD OF DEATH 2022 - 162

The CAPiTA Black Snowboard of Death Snowboard isn't going anywhere. This legendary board has been continually morphed and modified in pursuit of all-mountain perfection. Dark and scary as it might sound, you'll quickly see the light with this progressive, directional design that features a slightly wider frame and Death Grip™ for enhanced tight turns. This year, the CAPiTA Black Snowboard of Death Snowboard comes upgraded with a new FC Hover Core™ with Forged Carbon Rods integrated under the core for even more response. How spooky is that?

Rocker Type

Alpine V1 Profile  The ALPINE V1 Profile design features mid-body camber with a flat tail and a reverse cambered nose. This allows for tons of pop and stability on hard pack while increasing float and landing power, improving the rider’s performance in deep snow. The camber runs longer in the tail—providing extra power for the ascent or for larger riders drawn to a dedicated wide series.

Flex

Directional Flex

Flex Rating  6.5 (1 Soft - 10 Stiff)

Shape

New Age Directional  NEW AGE DIRECTIONAL sidecuts are progressive sidecuts, which also incorporate a reverse sidecut arc in the midsection of the board. Due to a reduced effective edge as a result of hybrid camber shapes, this reverse camber arc provides a point of contact to retain control throughout the turn and is affectionately referred to as DEATH GRIP™.

Core

Reinforced with Twin Forged Carbon Rods

FC Hover Core™  Enhanced with Forged Carbon rods integrated beneath its core, the FC HOVER Core is extremely light and strong with excellent dampening properties.

Laminates

Carbon Fleece Power Shield™  With two Carbon Fleece power pads underfoot, maximum thrusting power is achieved for ollies and stability under varied-terrain while torsional forgiveness allows for ease of command in battle.

Amplitech™ V-Tech Amplifier  Amplitex™ is a next-generation natural flax fiber woven with carbon strands that is featured in high-end snowboard constructions. This fusion tape brings the best of two worlds: the reactive energy of carbon and the lightweight and dampening aspects of flax. The two fibers are highly compatible since they have similar properties regarding thermal expansion and failure strain, creating a uniformly flexing reinforcement that's light, snappy and durable all in one.

Triax/Triax Holysheet™  The HOLYSHEET™ fiberglass configuration features fiber weaves with a high tensile strength and low modulus of elasticity. With a higher roving count in the same weight of glass, you can have a stronger and more responsive board without adding extra weight. Triaxial fiberglass is placed on both the top and bottom of the core providing maximum strength, durability and performance.

Magic Bean Resin  This advanced resin system has a bio-content of 60% renewable, agricultural raw material and is produced with no waste or greenhouse emissions. In production, it has a low-temperature requirement with a high yield output. Poppy, powerful, and extremely durable, MAGIC BEAN™ resin yields much stronger and more rigid qualities allowing a decrease in the wood core thickness. This means you get a lighter board while achieving higher energy return.

Sidewalls

Full ABS1000 Sidewalls

Base

Hyperdrive™ Base  Exclusively formulated, sintered, ultra-high molecular weight, ultra-high density polyethylene, custom engineered with special additives. Rated for the most depraved speed junkies only.

Moonshot Pro-Tune™  The MOONSHOT PRO-TUNE™ is an aftermarket high-performance race-base structure that wicks water from your base in 45-degree angles making these boards fast as heck to the lift line or to the finish line.

Edges

360 Degree HRC48 Steel Edges

Topsheet

PAM16000™ Topsheet with Metallic Underlay

PLT™ Topsheet Technology  PLT™ technology is exclusive to CAPiTA MFG and magically bonds the topsheet to an already pressed snowboard.

Graphics

Multitech™ Level 5 DeepSpace™ Metallic Silkscreen  The DEEPSPACE™ Design Theory takes advantage of the thickness of a transparent topsheet. Strategically layering ink on multiple levels from the top and the bottom imbues graphics with a sense of life through depth.

Die-cut Base Graphic

Binding Compatibility

Stainless Steel 2 x 4 Inserts

Specs

  • Terrain:All-Mountain, FreerideMore 
    All-MountainFreeride
  • Ability Level:Advanced-ExpertMore 
    Advanced-Expert
  • Rocker Type:Rocker/Camber/RockerMore 
    Rocker/Camber/Rocker
  • Shape:Directional
  • Flex Rating:MediumMore 
    Medium
  • Binding Mount Pattern:2x4
  • Core/Laminates:Carbon, Flax, Wood
  • Snowboard Awards:Transworld Snowboarding Good Wood, Snowboarder Magazine Best of Test
    Transworld Snowboarding Good Wood Snowboarder Magazine Best of Test
  • Warranty:2 Years


Type: SNOWBOARD


Pin It Fancy

Related Items


x
x